Side of house—BEFORE—Fence and Willow tree needed to be removed as well as a section of concrete driveway.
Two weeks after Thanksgiving the cement pad was poured. We had also started to make progress on the conversion. I removed the garage door, and we removed all the sheetrock inside to prep for framing, electrical and duct work to be done.
New walls were framed on the three exterior sides…leaving us with double thick walls for tons of insulation. We installed R-30 unfaced with R-13 faced to fill the 12″ thick walls. This was after we hired an electrician to run all the new outlets and cut four can lights and get wires ready for a chandelier to be hung in the center of the room over my cutting table.
At this point we also extended the duct work from the home through the attic space and did 3 registers and 1 return. Heber’s buddy from the fire station helped him draw up what we would need and gave him a hand for a day and got it done.
We also decided to hire out the sheetrock and tape and mud. Worth the $ of not having to borrow a trailer and load all the sheetrock and try to keep it dry on the drive home on slushy roads, and then try to install it ourselves. We paid $1100 for the materials and labor. Materials alone were going to cost us $500—so I figured for $600 more Heber could have a few weeks off.
Now onto the stairs….small concrete steps that go into the kitchen from the work room.
My dad drew up some plans to make a larger/ safer landing and stairs. He even stopped at Home Depot on the way out and picked up what we needed, to save us a trip to Home Depot.
We framed around the concrete steps…..kind of like a slipcover over the stairs.
I was planning on painting the steps and doors a mossy green, so we were able to use MDF as the top step and real wood tread for the second stair.
Front room BEFORE barn door install
Front room AFTER Barn door install. We got the barn door hardware from Kong Sheds. We also paid for them to install….well worth the $120.
Yes, that is a large scratch in the door—it’s character right? I like character and rustic things. Kong Sheds did an AWESOME job!
I got the door from ReStore for $50 (I talked them down from $100) and managed to fit it in the back of my friends SUV.
M’am that’s not going to fit….”Really?….I’ve got 4″ to spare!”
Barn door goes into my new work studio!
My running partner cringes at my white baskets under my cutting table…but until I find some cool large wood or metal crates….they are going to have to work.
New Work Studio–AFTER
Found my mossy green fish and tackel box at DI—I keep all my buttons, needles, and trinkets in it.
Found this dresser at Savers for $10!!! I did nothing to it…LOVE IT! I fit it in the trunk of my husbands Hyundai Sonata and tied it in with some piping. “M’am that’s not going to fit!”….”Can you just help me lift it in?”
Heber’s Sonata….I started my business in this car 12 years ago…I usually know what’s going to fit. (Don’t worry this chair was mine…not a clients). Now I have a 5×8 enclosed trailer and an SUV. Gotta start somewhere, right?
Found this great hutch on KSL.com for $175—love the dark wood. It stores a bunch of my thread, zippers, and fabric
Loved the Hardware.
We stained pine boards with “Dark Walnut” stain from Minwax….Easiest trim job ever! Staining is tons faster than painting.